Label Printing Template Information: LP10/70

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels (and Avery labels), so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!
You can also use any of the Avery codes listed below to access an Avery template that is built in to the software you want (or need) to use to design and/or print your labels.

View ALL Templates For Rectangular Labels With Rounded Corners // View ALL Templates For Special Use Labels

Template Information For Product Code: LP10/70
Product Image Label Width Label Height Number Across Number Down
LP10/70 70mm 52mm 2 5
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
18.5mm 18.5mm 23mm 23mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
52mm 94mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates
J8666^*, J8766^*, L7666^* SL10
 
Word Templates Word Templates (alternative) PDF Templates PDF Templates
(alternative)
Portrait Portrait PDF Portrait PDF Portrait
Landscape Landscape PDF Landscape PDF Landscape
Text Box Portrait Text Box Portrait  
Text Box Landscape Text Box Landscape  
 
Notes About This Template
  • Diskette Labels – rectangles with rounded corners
  • Centralised layout
  • Selvedge present
  • Bleed not possible
  • Feed direction not indicated
  • Gaps between labels (horizontal only)
  • Please note that this label size is sometimes manufactured with a label height that is less than 52mm.
    If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a label height of 51.8mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller label height.
    [If you are working in landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “alternative” template. If you make your own adjustments, you need to remember to alter the side margins.]
  • This product is close in size/layout to the Avery* products listed above; the Avery* product details are 23.35mm side margins and a 93.3mm horizontal pitch.
Products Available For Template Size LP10/70 - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)
     
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)