Label Printing Template Information: LP33/53

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!

View ALL Templates For Rectangular Labels With Rounded Corners

Template Information For Product Code: LP33/53
Product Image Label Width Label Height Number Across Number Down
LP33/53 54mm 22mm 3 11
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
17.5mm 17.5mm 21mm 21mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
24mm 57mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates
N/A VSL33, A2254^, P22.54^
 
Word Templates Word Templates
(alternative)
PDF Templates PDF Templates
(alternative)
Portrait Portrait PDF Portrait PDF Portrait
Landscape Landscape PDF Landscape PDF Landscape
Text Box Portrait Text Box Portrait PDF Bleed Portrait PDF Bleed Portrait
Text Box Landscape Text Box Landscape PDF Bleed Landscape PDF Bleed Landscape
Bleed Portrait Bleed Portrait  
Bleed Landscape Bleed Landscape  
 
Notes About This Template
  • Rectangles with rounded corners
  • Centralised layout
  • Selvedge present
  • Bleed of 1.5mm/1mm (alternative: 1.5mm/0.95mm) possible
  • Feed direction not indicated
  • Gaps between labels (vertical and horizontal)
  • Please note that this label size is sometimes manufactured with a vertical pitch that is less than 24mm.
    If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a vertical pitch of 23.9mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller vertical pitch.
    [If you are working in landscape the vertical pitch becomes the horizontal pitch; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “alternative” template. If you make your own adjustments, you need to remember to alter the side margins.]
Products Available For Template Size LP33/53 - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)
     
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)