Label Printing Template Information: LP21/70

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels (and Avery labels), so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!
You can also use any of the Avery codes listed below to access an Avery template that is built in to the software you want (or need) to use to design and/or print your labels.

View ALL Templates For Rectangular Labels With Square Cut Corners

Template Information For Product Code: LP21/70
Product Image Label Width Label Height Number Across Number Down
LP21/70 70mm 42.42mm 3 7
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
0mm 0mm 0mm 0mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
42.42mm 70mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates

A4/A5: 3652*
Zweckform: 6174*

EL21, LL21NSE, L21-7042BC, LBC7042^, CLO21
 
Word Templates Word Templates
(alternative)
PDF Templates PDF Templates
(alternative)
Portrait Portrait PDF Portrait PDF Portrait
Landscape Landscape PDF Landscape PDF Landscape
Text Box Portrait Text Box Portrait    
Text Box Landscape Text Box Landscape    
 
Notes About This Template
  • Rectangles with square cut corners
  • Centralised layout
  • No selvedge
  • Bleed not possible
  • Feed direction not indicated
  • No gaps between labels
  • These labels go all the way to the edge of the sheet; only printers with an “Edge-To-Edge” printing capability will be able to print the full area of each label. If you do not have access to such a printer, you will need to ensure your design does not use the area that your printer cannot print.
  • Please note that Word does not allow measurements of 2 decimal places when working in mm.
    Our template is set up with a label height of 42.4mm.
  • Please note that this label size is sometimes manufactured with a label height that is less than 42.42mm.
    If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a label height of 42.3mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller label height.
    [If you are working in landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “alternative” template. If you make your own adjustments, you need to remember to alter the side margins.]
Products Available For Template Size LP21/70 - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)
     
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)