Label Printing Template Information: LP24/40R

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your round labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels (and Avery labels), so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!
You can also use any of the Avery codes listed below to access an Avery template that is built in to the software you want (or need) to use to design and/or print your labels.

View ALL Templates For Round Labels & Circular Labels

Template Information For Product Code: LP24/40R
Product Image Label Width Label Height Number Across Number Down
LP24/40R 40mm
(diameter)
40mm
(diameter)
4 6
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
13.5mm 13.5mm 16mm 16mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
46mm 46mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates
E3613*, L3415*, L6112*, L7780* SL40R, AACX24, FCX24, P40
 
Word Templates Word Templates (alternative) PDF Templates PDF Templates
(alternative)
Portrait Portrait PDF Portrait PDF Portrait
Text Box Portrait Text Box Portrait PDF Bleed Portrait PDF Bleed Portrait
Bleed Portrait Bleed Portrait  
 
Notes About This Template
  • Circles
  • Centralised layout
  • Selvedge present
  • Bleed of 3mm (alternative: 2.75mm) possible
  • Feed direction not indicated
  • Gaps between labels (vertical and horizontal)
  • Shape indicated on PDF template but NOT on Word template
  • Please note that this label size is sometimes manufactured with a vertical pitch that is less than 46mm.
    If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a vertical pitch of 45.9mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller vertical pitch.
Products Available For Template Size LP24/40R - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)
REM
(Matt White Paper With Removable Adhesive)
C
(Coloured Paper With Permanent Adhesive)
FC
(Fluorescent Paper With Permanent Adhesive)
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)