Label Printing Template Information: LP15/51SQ

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your square labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!

View ALL Templates For Square Labels

Template Information For Product Code: LP15/51SQ
Product Image Label Width Label Height Number Across Number Down
LP15/51 51mm 51mm 3 5
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
17.2mm 17.2mm 26.6mm 26.6mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
52.9mm 52.9mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates
N/A SLsq51, LL51SQ, AAT015^, C5050^, P51.51^
 
Word Templates Word Templates (alternative) PDF Templates PDF Templates (alternative)
Portrait Portrait PDF Portrait PDF Portrait
Text Box Portrait Text Box Portrait PDF Bleed Portrait PDF Bleed Portrait
Bleed Portrait Bleed Portrait  
 
Notes About This Template
  • Squares with rounded corners
  • Centralised layout
  • Selvedge present
  • Bleed of 0.95mm (alternative: 1.1mm) possible
  • Feed direction not indicated
  • Gaps between labels (vertical and horizontal)
  • Please note that this label size is sometimes manufactured with a label width and label height that are less than 51mm and a vertical pitch and horizontal pitch that are more than 52.9mm.
    If you find that your design is printing out slightly too big for your labels (i.e. if your design doesn’t start at the top and left edges and finish at the bottom and right edges of each label), you may want to try using our alternative templates (these templates are set up with a label width and label height of 50.8mm and a vertical pitch and horizontal pitch of 53mm). If you wish to make your own adjustments to the template you are using, remember you will also need to alter the top and side margins to suit the alternative measurements.
Products Available For Template Size LP15/51SQ - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)

REM
(Matt White Paper With Removable Adhesive)

C
(Coloured Paper With Permanent Adhesive)

FC
(Fluorescent Coloured Paper With Permanent Adhesive)

 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)