Label Printing Template Information: LP70/25SQ

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your square labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!

View ALL Templates For Square Labels

Template Information For Product Code: LP70/25SQ
Product Image Label Width Label Height Number Across Number Down
LP70/25 25mm 25mm 7 10
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
14.5mm 14.5mm 11.5mm 11.5mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
27mm 27mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates
N/A SLsq25, LL25SQ, AAS070, C2525, P25.25
 
Word Templates PDF Templates
Portrait PDF Portrait
Text Box Portrait PDF Bleed Portrait
Bleed Portrait  
 
Notes About This Template
  • Squares with rounded corners
  • Centralised layout
  • Selvedge present
  • Bleed of 1mm possible
  • Feed direction not indicated
  • Gaps between labels (vertical and horizontal)
  • Please note that these labels are sometimes cut to a label width and a label height that are just under 25mm (approximately 24.95mm). If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet and your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row), you may wish to try decreasing the label width and label height. You will also need to increase the top and side margins to accommodate for using the smaller label width and label height, and check that your horizontal and vertical pitches are correct.
Products Available For Template Size LP70/25SQ - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)

REM
(Matt White Paper With Removable Adhesive)

C
(Coloured Paper With Permanent Adhesive)

FC
(Fluorescent Coloured Paper With Permanent Adhesive)

 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)