Matt White Polypropylene Labels - Material Specification Sheet.
Matt White Polypropylene with a Permanent Adhesive – BS5609 part 2 approved *
Suitable for a wide range of outdoor and robust labelling requirements especially Haz-Chem labels, where longevity and durability are required in an Ink-Jet digitally printable material.
Face material properties
Grammage 60 gsm
Caliper (thickness) 83 microns
A clear permanent, water based emulsion acrylic based adhesive with good tack & adhesion on a wide range of surfaces. Specially designed for the labelling of chemical drums and other difficult surfaces.
Minimum application temp. +0°C
Storage range once applied -40°C to +120°C
A siliconized special kraft paper with good lay-flatness & stability
Thickness 75 microns
Grammage 75 gsm
Enironment and handling
All papers used are from managed sustainable resources and the laminate is manufactured without the use of solvents and under the controls of ISO 14001.
The labels should be kept in their original bags & boxes and stored in dry conditions. The product should be used only after being moved to the print room for a minimum of 48 hours prior to use. Print room conditions should be at a temperature range of 19-22deg C and a humidity of 45 to 60%RH. If effectively stored a shelf life of two years can be expected though not guaranteed.
The very high coat-weight of adhesive on this material gives it incredible adhesion but may lead to sticky edges. While inkjet printers do not use or create much heat to operate (making them less prone to adhesive bleed than laser printers), care should be taken when printing large volumes of this product.
* MWPP is BS5609 part 2 & part 3 approved when printed on the following printer models (using pigmented inks):
- Epson TM-C Epson TM-C3500 and Colorworks TM-C7500
- Epson Colorworks TM-C7500G
- Primera LX2000e
- Kiaro D