Label Printing Template Information: LP24/70LS

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!

View ALL Templates For Rectangular Labels With Square Cut Corners

Template Information For Product Code: LP24/70LS
Product Image Label Width Label Height Number Across Number Down
LP24/70LS 70mm 34mm 3 8
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
12.5mm 12.5mm 0mm 0mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
34mm 70mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates

N/A

EL24LS
 
Word Templates
PDF Templates
Portrait PDF Portrait
Landscape PDF Landscape
Text Box Portrait  
Text Box Landscape  
 
Notes About This Template
  • Rectangles with square cut corners
  • Centralised layout
  • Selvedge present
  • Bleed not possible
  • Feed direction not indicated
  • No gaps between labels
  • These labels go all the way to the edge of the sheet; only printers with an “Edge-To-Edge” printing capability will be able to print the full area of each label. If you do not have access to such a printer, you will need to ensure your design does not use the area that your printer cannot print.
  • Please note that these labels are sometimes cut to a label height that is very slightly under 34mm. If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may wish to try adjusting the label height to 33.9mm. You will also need to increase the top margin to accommodate for using the smaller label height.
    [If you are working in landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using 33.9mm as the label width. Remember, you will also need to alter the side margins.]
Products Available For Template Size LP24/70LS - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)
     
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)