Label Planet
Label Templates For LP4/100R
- LP Code:
- Label Templates LP4/100R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
2
Label Width
100mm (diameter)
Label Height
100mm (diameter)
Horizontal Pitch
N/A (step across 92mm)
Vertical Pitch
106mm (step up 56.4mm)
Number Down
2
Top Margin
20mm
Bottom Margin
14.6mm
Left Margin
12mm
Right Margin
6mm
Also Known As
SL100R
Download LP4/100R Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP4/100R Portrait | |
| Word | LP4/100R Bleed Portrait | |
| LP4/100R Portrait | ||
| LP4/100R Bleed Portrait |
- Circles
- Off centre layout
- Selvedge present
- Bleed of 2mm possible
- Feed direction indicated (by layout)
- Gaps between labels (stepped and horizontal)
- Shape indicated on PDF template but NOT on Word template
- Please note that the margins for this label size – particularly when using the bleed templates – are narrow and may fall outside the printable area of some standard printers, which will prevent the printing of borders and/or coloured backgrounds. If your printer cannot print the full area of these labels, you will need to ensure your design does not use the area that your printer cannot print.
Products Available In Template Size LP4/100R
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)