Matt White Polyester With A Permanent Adhesive - BS5609 part 2 approved (MWP)
MULTIPURPOSE (LASER/COPIER PRODUCTS)
A matt white polyester (PET) specifically designed for use on ‘hot fuse’ printer systems. Some slight curl may occur on exiting the printer but this will flatten quickly. This material is primarily used in the area of ‘long life’ durable, tracking labels. This material also confirms to BS5609 part 2 for marine immersion. (To fully meet the BS5609 standard, independent testing of the label with overprinting included should be conducted).
Face material properties
Grammage 76 gsm
Caliper (thickness) 50 microns
A clear permanent, water based emulsion acrylic based adhesive with good tack & adhesion on a wide range of surfaces.
Minimum application temp. +5°C
Storage range once applied -20°C to +80°C
A one side clay coated, bleached kraft paper with good lay-flatness & stability
Thickness 110 microns
Grammage 98 gsm