Silver Matt Metallic Polyester With A Permanent Adhesive (SMP)
MULTIPURPOSE (LASER/COPIER PRODUCTS)
A matt silver polyester (PET) specifically designed for use on ‘hot fuse’ Laser/Copier print systems. Some slight curl may occur on exiting the printer but this will flatten quickly. This material is primarily used in the area of ‘long life’ durable, tracking or product labels, especially appliance & electronics labelling.
Face material properties
Grammage 80 gsm
Caliper (thickness) 58 microns
A clear permanent, acrylic based adhesive with good tack & adhesion on a wide range of surfaces.
Minimum application temp. +0°C
Storage range once applied -20°C to +80°C
A one side clay coated, bleached kraft paper with good lay-flatness & stability
Thickness 110 microns
Grammage 98 gsm
Please note: these labels are made with metallised polyester and will reflect heat in the fuser unit. This means these labels require less heat to print correctly and the "Labels" setting of some laser printers may be too hot to get the best print results - the "Normal Paper" setting should be used instead of the "Labels" setting to avoid these issues.
Paper components are either ECF or TCF grade manufactured using pulp from sustainable, managed resources. All dimensions are nominal target specifications, but may vary. All products within our range are manufactured under ISO9001:2008