Label Templates For LP15/51R
- LP Code:
- Label Templates LP15/51R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!View Products Available In This Label Size
Information About This Label Size:
- Number Across
- Label Width
- 51mm (diameter)
- Label Height
- 51mm (diameter)
- Horizontal Pitch
- Vertical Pitch
- Number Down
- Top Margin
- Bottom Margin
- Left Margin
- Right Margin
- Also Known As
- SL50R, LL51C, AAC015, D510, FC15, A51, LDC51B, P51
Download LP15/51R Label Templates:
- Centralised layout
- Selvedge present
- Bleed of 1mm (alternative / gaps: 0.5mm) possible
- Feed direction not indicated
- Gaps between labels (vertical and horizontal)
- Shape indicated on PDF template but NOT on Word template
- Please note that this label size is commonly made with a different layout: this layout features a 51mm diameter label size, a vertical pitch of 52.4mm (the gaps between the rows are 1.4mm), and a horizontal pitch of 52.5mm (the gaps between the columns are 1.5mm). Before selecting your template, please measure the size of the gaps between the labels to confirm which template you need to use.
- Please note that this label size is sometimes manufactured with a vertical pitch that is less than 53mm.
- If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may wish to try using our alternative templates (these templates are set up with a vertical pitch of 52.8mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller vertical pitch.
Products Available In Template Size LP15/51R
Please Note:These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.
All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)