Label Printing Template Information: LP84/46

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.
Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels (and Avery labels), so you can print your labels quickly, easily, and – perhaps most importantly – trouble free!
You can also use any of the Avery codes listed below to access an Avery template that is built in to the software you want (or need) to use to design and/or print your labels.

View ALL Templates For Rectangular Labels With Rounded Corners // View ALL Templates For Special Use Labels

Template Information For Product Code: LP84/46
Product Image Label Width Label Height Number Across Number Down
LP84/46 46mm 11.1mm 4 21
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
15.95mm 15.95mm 5.95mm 5.95mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
12.7mm 50.7mm
 
Printing Assistance Avery* Codes: Also Known As:
Help & Advice
View All Templates
J8656*, J8657*, J8756*, J8756V*, L7084*, L7556*, L7656* SL84, LL84, AAR084, LDC4611B^
 
Word Templates Word Templates (alternative) PDF Templates PDF Templates
(alternative)
Portrait Portrait PDF Portrait PDF Portrait
Landscape Landscape PDF Landscape PDF Landscape
Text Box Portrait Text Box Portrait PDF Bleed Portrait PDF Bleed Portrait
Text Box Landscape Text Box Landscape PDF Bleed
Landscape
PDF Bleed
Landscape
Mirror Portrait Mirror Portrait    
Mirror Landscape Mirror Landscape    
Bleed Portrait Bleed Portrait    
Bleed Landscape Bleed Landscape    
 
Notes About This Template
  • Rectangles with rounded corners
  • Centralised layout
  • Selvedge present
  • Bleed of 2.35mm/0.8mm (alternative: 2mm/0.8mm) possible
  • Feed direction not indicated
  • Gaps between labels (vertical and horizontal)
  • Please note that this label size is sometimes manufactured with a horizontal pitch that is less than 50.7mm.
    If you find that your design is printing out slightly too big for your labels (i.e. if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row), you may want to try using our alternative templates (these templates are set up with a horizontal pitch of 50mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the side margins to accommodate for using the smaller horizontal pitch.
    [If you are working in landscape the horizontal pitch becomes the vertical pitch; so if your design doesn’t start at the top of the first label in each column and end at the bottom of the last label in each column, you may need to try using the “alternative” template. If you make your own adjustments, you need to remember to alter the top margin.]
  • Please note that the very narrow gap between each row of labels can mean that any slight variation in the cut or inaccuracy in the positioning produced by your template or printer can cause the alignment to get very slightly worse as you go down the page. If you find that, by the end of the sheet, your template is just slightly too big or too small (i.e. the top row aligns perfectly but your template ends just below or above the bottom edge of the bottom row) you may need to alter (some of) the gaps between the rows to manually create the correct alignment. You may also need to make a slight adjustment to the top margin to get the best possible fit.
    [If you are working in landscape it is the gaps between the columns that you will need to adjust; so if your design starts at the left edge of the first column and ends under 2mm beyond or before the right edge of the last column, you may want to try adjusting the gaps between the columns (and altering the side margins) to perfect your alignment.]
Products Available For Template Size LP84/46 - Click The Links Below To View Products
STA
(Matt White Paper With Permanent Adhesive)

DF
(Matt White Paper With Freezer Adhesive)

WW
(Matt White Paper With Permanent Wash Off Adhesive)

REM
(Matt White Paper With Removable Adhesive)

GREM
(Matt White Paper With Super Removable Adhesive)
HT
(Matt White Paper With High Tack Adhesive)
ST
(Matt White Paper With Super Tack Adhesive)
GW
(Gloss White Paper With Permanent Adhesive)

GWPQ
(Gloss White Photo Quality Paper With Permanent Adhesive)

SG
(Semi-Gloss White Paper With Permanent Adhesive)

MPQ
(Matt White Premium Quality Paper With Permanent Adhesive)

OPQ
(Matt White Paper With Permanent Opaque Adhesive)

C
(Coloured Paper With Permanent Adhesive)

FC
(Fluorescent Coloured Paper With Permanent Adhesive)

REMC
(Coloured Paper With Removable Adhesive)

LG
(Gold Paper With Permanent Adhesive)

LS
(Silver Paper With Permanent Adhesive)

BRK
(Brown Kraft Paper With Permanent Adhesive)

GCP
(Gloss Clear Polyester With Permanent Adhesive)

GTP
(Gloss Transparent Polyester With Permanent Adhesive)

GTR
(Gloss Transparent Polyester With Removable Adhesive)

MTP
(Matt Transparent Polyester With Permanent Adhesive)

GWP
(Gloss White Polyester With Permanent Adhesive)

MWP
(Matt White Polyester With Permanent Adhesive)

MWR
(Matt White Polyester With Removable Adhesive)

SMP
(Silver Matt Metallic Polyester With Permanent Adhesive)

MWPE
(Matt White Polyethylene With Permanent Adhesive)
MWPO
(Matt White Polyolefin With Permanent Adhesive)

SVP
(Silver Matt Metallic Polyester With Permanent “VOID” Adhesive)

TEV
(Tamper Evident Vinyl With Permanent Adhesive)
 

 

 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

^ Our labels are very close in size/layout to the (Avery) code provided (within +/- 1mm)