Tamper Evident Vinyl Labels – Material Specification Sheet.

MULTIPURPOSE (LASER/COPIER PRODUCTS)

13

Tamper Evident Cast Vinyl with a permanent adhesive
(TEV)
A special white matt PVC (Vinyl) film designed to be extremely fragile in its nature so that it will break when put under any tear stress. This means that, once applied, any attempt to remove it will result in no more than a frustrating mess of little bits coming away slowly. With its special purpose adhesive, this material was designed for the labelling of goods and items where it is very important that the label be difficult to remove or that some evidence will be apparent even if an attempt at removal is made.

The material was specifically designed for use on mono and colour ‘hot fuse’ printer systems. Some slight curl may occur on exiting the printer but this will flatten quickly.

Face material properties
Grammage 100 gsm
Calliper (thickness) 50 microns (+/- 3)

Adhesive
A special formulation of an acrylic based adhesive.

Minimum application temp. 10 to 30°C
Storage range once applied -40°C to +80°C

Backing
Kraft backing paper, matt-coated on reverse side with good lay-flatness & stability.

Grammage 140 gsm (+/- 7)
Calliper (thickness) 168 microns (+/- 8)

Environmental
Paper components are either ECF or TCF grade manufactured using pulp from sustainable, managed resources. All dimensions are nominal target specifications, but may vary. All products within our range are manufactured under ISO9001:2008.

Click Here To View Our Tamper Evident Vinyl Label Product Range