Label Templates For LP70/25R
- LP Code:
- Label Templates LP70/25R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!View Products Available In This Label Size
Information About This Label Size:
- Number Across
- Label Width
- 25mm (diameter)
- Label Height
- 25mm (diameter)
- Horizontal Pitch
- Vertical Pitch
- Number Down
- Top Margin
- Bottom Margin
- Left Margin
- Right Margin
- Also Known As
- SL25R, LL25C, AAC070, C250, D250, FC70, A25, LDC25B, P25
Download LP70/25R Label Templates:
- Centralised layout
- Selvedge present
- Bleed of 1mm (alternative: 0.75mm) possible
- Feed direction not indicated
- Gaps between labels (vertical and horizontal)
- Shape indicated on PDF template but NOT on Word template
- Please note that this label size is sometimes manufactured with a vertical pitch that is less than 27mm.
- If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a vertical pitch of 26.9mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller vertical pitch.
- Please note that the colour materials are sometimes cut to a vertical pitch that is very slightly over 27mm.
- If you find that your design is printing out slightly too small for your labels (i.e. the bottom of your printed template finishes just above the bottom edge of the last label on the sheet), you may wish to try increasing the vertical pitch (by increasing the size of the gaps between each row of labels). You will also need to reduce the top margin to accommodate for using the larger vertical pitch.
Products Available In Template Size LP70/25R
Please Note:These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.
All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)